We distribute a wide range of products, components and accessories for Autogas Systems both LPG and CNG of the best leading brands in the sector, Made in Italy, such as Tomasetto Achille, AEB, RAIL, Valtek, OMB, Faro, etc ...
Click the buttons below to search for the products of related brands.
Products
VALTEK
VALTEK INJECTOR TIPO 30
Injectors for LPG and CNG, gaseous phase, interchangeable nozzles calibrated with 1/8 thread "G cyl.
Available in Standard or "BFC" version. Good performance even with poor quality LPG without mounting a protective filter, easy maintenance and reduced size. Excellent silence.
Available in various models of 2, 3 and 4 cylinders.
VALTEK INJECTOR TIPO 33
Gaseous injectors with 0.45 MPa maximum working pressure, available with coils with different resistance, AMP Superseal Built-in connector. The injectors are available in different versions with 2, 3 and 4 injectors, with gas inlet option for both sides of the rail by means of hose connection with D of 11, 12 mm.
Compared to Type 30 rail: - Lighter: -20% weight - More compact: height -3 mm - higher performance (eg version 3 OHM @ 2 bar): - Standard: opening time 3.4 ms / closing 1, 6 ms - Large flow capacity (BFC): Opening time 3.6 ms / closing 1.8 ms
VALTEK INJECTOR TIPO 34
Injectors for gaseous fuel with integrated AMP / Delphi Superseal IP54 electrical connector with sealing class. The injectors are available mounted on plastic rail made by high Polymer technology in the versions with 2, 3 and 4 injectors, with gas inlet option for both sides by means of D11 connectors, 14 and 16 mm.
Minimum opening time STD: 1.9 ms - BFC: 2.2 ms
STD closing time: 1.0 ms - BFC: 1.0 ms
VALTEK INJECTOR TIPO 37
Gaseous fuel injectors with 0.45 MPa maximum working pressure, available with coils with different resistance, AMP / Delphi superseal built-in connector. The injectors are available installed on Hi-Tech Polimer in different versions with 2, 3 and 4 injectors, with gas inlet option for both sides of the rail by means of hose connection with D of 11, 12, 14 and 16 mm.
VALTEK INJECTOR TIPO 39
Gaseous injectors with 0.45 MPa maximum working pressure, available with AMP / Delphi superseal built-in connector. The injectors are available installed in different versions with 2, 3 and 4 injectors, with gas inlet option for both sides of the rail by means of hose connection with D of 11 and 12 mm.
VALTEK INJECTOR TIPO 40
Single injector, for LPG and CNG, interchangeable calibrated nozzles from 1.5 mm to 2.5 mm.
Integrated superseal compatible connector, 1.5 IP 54 seal. Maximum working pressure 0.45 MPa (4.54 bar). Gas Inlet Ø6 mm 360 ° adjustable.
Good performance even with poor quality LPG without mounting a protective filter, easy maintenance and reduced size. Excellent silence.
Maximum opening speed 1OHM: 2.1 ms.
VALTEK FILTER TYPE 94
GAS filter for LPG or CNG in Polymero.
Material: Plastic polymer
Maximum working pressure: 0.45 MPa (4.5 bar)
Operating temperature: -40 ° C »+120 ° C
VALTEK FILTER TYPE 97
GAS filter for LPG or CNG in Polymero.
Material: Plastic polymer
Maximum working pressure: 0.45 MPa (4.5 bar)
Operating temperature: -40 ° C »+120 ° C
VALTEK LPG REDUCER PALLADIO
Single reduction phase, direct control of the membrane shutter
• Rapid response and dynamic conditions of stable pressure
• Adjustable output at 1 bar or 1.5 bar using the adjustment screw
• Aluminum body optimized for vaporization of the large flow of LPG
• Hydraulic system capacity: 150cc
• Integrated safety valve at 6 bar
• Built-in NTC water temperature sensor 4.7 kΩ
• For powers up to 350HP
VALTEK LPG REDUCER CPR66
Compact single-stage reducer for multi-point LPG sequential systems for engines with power up to 120kW (163HP).
- efficiency: 30 kg / h
- inlet gas pressure: 2.530 bar
- outlet gas pressure: 1.2 bar ± 7%
- safe valve opening: 3.7 bar
- integrated solenoid valve
- integrated liquid phase filter
- approved: 67R01